产品详情

带 EtherNet/IP接口激光测距传感器

  • 产品名称：带 EtherNet/IP接口激光测距传感器
  • 产品型号：LDM42EI
  • 产品厂商：耶拿
  • 产品文档：
你添加了1件商品 查看购物车
简单介绍
带 EtherNet/IP接口激光测距传感器 LDM42EI

带 EtherNet/IP接口激光测距传感器

的详细介绍

带 EtherNet/IP接口激光测距传感器 LDM42EI


带 EtherNet/IP接口激光测距传感器 LDM42EI

带 EtherNet/IP接口激光测距传感器 LDM42EI


The LDM41EI is an optoelectronic distance measuring device for industrial applications with EtherNet/IP interface.
It works contact-free on the principle of comparative phase measurement (amplitude modulation) and facilitates precisely accurate measurement of distances.

Both, the LDM41EI and the LDM42EI distinguish themselves through high precision as well as high independence from the surface of the measuring object. The red, well visible laser beam allows for easy alignment. The LDM42EI has been further developed for fast distance measurements on white surfaces.
Through the integrated EtherNet/IP interface it is possible to read in data of several devices into a control easily. 


Applications
  • Distance measurement and determination of position
  • Diameter measurement of rolls / coils 
  • Fill level measurement 
  • Position control 
  • Monitoring of safety-relevant parts 
  • Monitoring of lifting plants / lifting height measurement and positioning of elevators
  • Monitoring and positioning of cranes and conveyor systems


  • Millimeter precise measurement on various surfaces 
  • High range reflector-less distance measurement 
  • With additional reflectors on the target object measurements over 100 m 
  • Operation in extreme ambient temperatures with high precision and range
  • High supply voltage range between 10 V and 30 V DC with low power consumption 
  • Safe operation through laser class 2 
  • Easy adjustment through visible laser beam
  • Common flexible interface cable for supply voltage, switching output and analog output
  • Direct connection to EtherNet/IP
  • Controlled by EtherNet/IP control byte
  • Customized parameterization via PC 
  • Display of measured values in meters, feet, inches and others due to free scaling
  • Robust, compact housing, easy to install, protection standard IP 65


Measuring range1

0.2 m ... 30 m on almost all natural surfaces, over 100 m achievable depending on the degree of reflection of surfaces 

Measuring uncertainty2 ±2 mm under defined measuring conditions3
±3 mm (+15°C ... +30°C)
±5 mm (-10 °C ... +50 °C)
Resolution

0.1 mm, freely scalable

Reproducibility4

0.5 mm

Measuring time

0.24 s ... 6 s adjustable or automatically in mode DT
0.1 s in mode DW on white surface
20 ms in mode DX on white surface (only LDM42EI) 

Laser class Laser class 2 acc. to DIN EN 60825-1:2001-11
Laser divergence5 0.6 mrad
Operating temperature -10 °C ... +50 °C
Storage temperature -40 °C ... +70 °C
Supply voltage

10 V ... 30 V direct currents

Power consumption Ca. 4 W
Serial interface

RS232, max. Baud rate 38400, ASCII, setting of measuring functions, scaling, measuring time via commands, display of measured values, internal temperature of the device and error code

Fieldbus6 Profinet
Switching output

Programmable switching threshold and hysteresis, "high side" switch, maximum load 0.5 A

Housing material

Aluminum anodized

Size (LxBxH) 187 mm x 96 mm x 50 mm
Weight 850 g
Protection class IP 65
Shock resistance 10 g / 6 ms (DIN ISO 9022-3-31-01-1)
MTBF 30,000 hours at 25 °C
Mounting

4 drill holes for M6 screws, 100 mm x 85 mm


Annotations to technical data: 
1 Dependent on target reflectance, influence of extraneous light and atmospheric conditions
2 Statistical spread of 95 %
3 Measurement on planar, vertical white surface at standstill or in continuous movement, + 15 °C to +30 °C
4 Dependent on target reflectance, influence of extraneous light and atmospheric conditions
5 At a distance of 10 m the beam diameter is 6 mm, at 100 m it is 6 cm

标题：
内容：
联系人：
联系电话：
Email：
公司名称：
联系地址：
 
 
注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!